Ricoh Aficio SP 5100N, Service Manual

Page: 124 / 175

EDC (Engine Diagnostic Control) Mode
G186 5-6 SM
ƒ The procedure and content above may vary, depending on the situation.
5.2.5 MOTOR TEST
These functions are to check the current status.
Usage
1. Press the arrow keys "
'
/
(
" until "Component Test / 2.Motor Test" message is
displayed on the panel.
2. Press the "OK" key.
3. Press the arrow keys "
'
/
(
" to find a desired function (Refer to the table below).
4. Press the "OK" key.
5. Press the "OK" key to execute the function or the "Back" key to return to the previous
step.
Function Name Description Display (LCD)
Main Mtr Fwd.
The motor will run in the forward
direction or stop.
Main Mtr Fwd.
[ON] / [OFF]
Main Mtr Bwd.
The motor will run in the backward
direction or stop.
Main Mtr Bwd.
[ON] / [OFF]
Main Mtr Slow.
The motor will run in the forwarding
direction by half speed.
Main Mtr Slow.
[ON] / [OFF]
Dev Mtr Nor.
The motor will run in the forwarding
direction by normal speed.
Dev Mtr Slow.
[ON] / [OFF]
Dev Mtr Slow.
The motor will run in the forwarding
direction by half speed.
Dev Mtr Slow.
[ON] / [OFF]
Duplex Mtr Fwd.
The motor will run in the forwarding
direction.
Duplex Mtr Fwd.
[ON] / [OFF]
T2 Feed Motor
The motor will run in the forward
direction or stop.
T2 Feed Motor
[ON] / [OFF]
T3 Feed Motor
The motor will run in the forward
direction or stop.
T3 Feed Motor
[ON] / [OFF]