Ricoh Aficio FX10, Service Manual

Page: 37 / 284

2.1.6. Error Conditions
1. Book Scanner
The FCIP2 detects an error if one of the following conditions occurs.
Condition Description Error
Code
Incorrect home position
sensor condition
The scanner home position sensor did not turn on
after the motor moved 350 mm back to the home
position after scanning.
9-90
The scanner home position sensor stayed on after
the motor moved 20 mm from the home position at
the start of scanning.
9-91
During initialization, the scanner home position
sensor did not turn on after the motor moved 100
mm.
9-92
During initialization, the scanner home position
sensor stayed on after the motor moved 100 mm.
9-93
2. ADF
The main cpu detects an error if one of the following conditions occurs.
Jam Condition Description Error
Code
Non-feed
The scan line sensor does not switch on within
2.0 s of the ADF motor starting.
1-00
Incorrect sensor
conditions
The scanner home position sensor did not turn on
after the motor moved 100 mm back to the home
position after scanning using ADF.
9-94
Maximum document
length exceeded
The scan line sensor does not turn off after the
maximum document length has been fed since it
turned on; this is after 23 s at standard and detail
resolution, or 46 s at fine resolution (these times
are for a 1.2 m long document).
1-01
Error during feed-out
When the final page of the document has been
fed out of the scanner, or when a jammed
document has been removed, the ADF
initialization is done. The error occurs if a
document is placed into the feeder during
initialization.
No error
code
Cover open
While the machine is working, the ADF cover are
opened. No error
code
DETAILED SECTION DESCRIPTIONS June 10th, 1997
SCANNER
2-8