Ricoh Aficio FX10, Service Manual

Page: 110 / 284

System Switch 12
No FUNCTION COMMENTS
0
to
7
TTI printing position in the
main scan direction 08 to 92 (BCD) mm. Input even numbers only.
This setting determines the TTI print start position from
the left edge of the paper. If the TTI is moved too far to
the right, it may be obscured by the file number which
is on the top right of the page.
System Switch 13 - Not used (do not change the settings)
System Switch 14
No FUNCTION COMMENTS
0
Wording setting 0: Ricoh
1: Siemens - Set this bit to 1 for Siemens wording on
The LCD panel.
1-7 Not used Do not change the default setting.
System Switch 15 - Not used (do not change the settings)
System Switch 16 - Not used (do not change the settings)
System Switch 17 - Not used (do not change the settings)
System Switch 18 - Not used (do not change the settings)
System Switch 19 - Not used (do not change the settings)
System Switch 1A - Not used (do not change the settings)
System Switch 1B - Not used (do not change the settings)
System Switch 1C - Not used (do not change the settings)
System Switch 1D - Not used (do not change the settings)
System Switch 1E - Not used (do not change the settings)
System Switch 1F - Not used (do not change the settings)
Ser
v
ic
e T
a
b
les
June 10th, 1997 SERVICE TABLES AND PROCEDURES
BIT SWITCHES
4-25