Ricoh Aficio FX10, Service Manual

Page: 199 / 284

2. 2.ADF
Parameter
Formula
RAM
Address
Unit
Initial
Setting
W1
This parameter changes the start bit of the
main scan.
To increase the margin by X mm:
New setting = Current s X/0.508
To decrease the margin by X mm:
New setting = Current s X/0.508
8002A2(H) 0.508mm
02(H)
(02to04)
W2 Not adjustable
L1
This parameter changes the number of tx
motor steps after the scan line sensor is
activated.
To increase the margin by x mm:
New setting = Current s 7.875x
To decrease the margin by x mm:
New setting = Current setting - 7.875x
Initial setting of L1: 2 mm
800296(H)
(low)
800297(H)
(high)
1
7.875
mm
3F(H)
(0to200)
L2 Not adjustable (Original length - L1 - L3)
L3
This parameter changes the number of tx
motor steps after the scan line sensor is
deactivated.
To increase the margin by x mm:
New setting = Current setting - 7.875x
To decrease the margin by x mm:
New setting = Current s 7.875x
Initial setting of L3: 2 mm
800298(H)
(low)
800299(H)
(high)
1
7.875
mm
5C(H)
(0to200)
H523R562.WMF
REPLACEMENT AND ADJUSTMENT June 10th, 1997
IMAGE ADJUSTMENT
6 - 38