Ricoh Aficio FX10, Service Manual

Page: 112 / 284

4.2.3. Printer Switches
Printer Switch 00
No FUNCTION COMMENTS
0
Page separation mark
0: Disabled
1: Enabled 0: No marks are printed.
1: If a received page has to be printed out on two
sheets, an “x” inside a small box is printed at the
bottom right hand corner of the first sheet, and a “2"
inside a small box is printed at the top right hand
corner of the second sheet. This helps the user to
identify pages that have been split up.
1
Repetition of data when the
received page is longer than
the printer paper
0: Disabled 1: Enabled 0: The next page continues from where the previous
page left off.
1: The final few mm of the previous page are printed at
the top of the next page.
See section 2.2.12 for details.
2 Not used Do not change the settings.
3
Cleaning mode after bypass
feed
0: Disabled
1: After each page is fed
from the bypass feed slot 0: Cleaning mode is not done at all if bypass feed is
used.
1: Cleaning mode is done every time after a sheet of
paper is fed from the bypass feed slot.
4-7 Not used Do not change the settings.
Printer Switch 01 - Not used (do not change the settings)
Printer Switch 02
No FUNCTION COMMENTS
0
Cassette selection priority
when paper of same size
is in optional cassette.
0: Optional Cassette
1: Standard Cassette This bit is available when optional cassette is installed.
1-7 Not used Do not change the settings.
Ser
v
ic
e T
a
b
les
June 10th, 1997 SERVICE TABLES AND PROCEDURES
BIT SWITCHES
4-27