manualshive.com logo in svg

Ricoh Aficio 240W, Operating Instructions Manual, Page: 74 / 92

Share
Download
Ricoh Aficio 240W Operating Instructions Manual Download Page 74

Remarks

62

5

• Unplug the power cord from

the wall outlet. When you pull
the plug out of the socket, grip
the plug (not the cord) to avoid
damaging the cord, thereby re-
ducing the risk of fire and elec-
tric shock.

• Close all covers and trays, in-

cluding the front cover and by-
pass tray.

❒

Move the machine carefully. If you
do not, it could be damaged and
stored files might be lost.

❒

Protect the machine from strong
shocks. Impact can damage the
hard disk and cause stored files to
be lost. As a precautionary meas-
ure, files should be copied to an-
other computer.

Power Connection

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

• When the main power switch is in

the standby position, the optional
anti-condensation heaters are on.
In an emergency, unplug the ma-
chine's power cord.

• When you unplug the power cord,

the anti-condensation heaters go
off.

• Make sure the plug is inserted

firmly in the wall outlet.

• Voltage must not fluctuate by

more than 10%.

• The wall outlet should be near the

machine and be easily accessible.

Clearance Around the Machine

Place the machine near a power
source, and provide the clearance as
shown.

Note

❒

For the required space when op-
tions are installed, please contact
your service representative.

•

Connect the machine only to 
the power source described on 
the inside front cover of this 
manual. Connect the power 
cord directly into a wall outlet 
and do not use an extension 
cord.

•

Do not damage, break or make 
any modifications to the power 
cord. Do not place heavy ob-
jects on it. Do not pull it hard 
nor bend it more than neces-
sary. These actions could 
cause an electric shock or fire.

•

Unplug the power cord from the 
wall outlet before you move the 
machine. While moving the ma-
chine, you should take care that 
the power cord will not be dam-
aged under the machine.

•

When you disconnect the power 
plug from the wall outlet, always 
pull the plug (not the cable).

Standard setting

Front

more than 100 cm (40")

Rear

more than 60 cm (23")

Left

more than 60 cm (23")

Right

more than 60 cm (23")

Rear

Front

Right

Left

ABB010S

NeptuneC1_GBzen_F_FM_pre.book  Page 62  Tuesday, December 16, 2003  5:03 PM

Summary of Contents for Aficio 240W





























































































Reviews:

No comments