Ricoh Aficio 240W Operating Instructions Manual Download Page 16 | Manualshive

Page: 16 / 92

Ricoh Aficio 240W Operating Instructions Manual Download Page 16

4

R

CAUTION:

•

Protect the machine from dampness or wet weather, such as rain and snow.

•

Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will not
be damaged under the machine.

•

When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).

•

Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.

•

Keep toner (used or unused) and toner bottle out of the reach of children.

•

For environmental reasons, do not dispose of the machine or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer.

•

The inside of the machine could be very hot. Do not touch the parts with a
label indicating the “hot surface”. Otherwise, an injury might occur.

NeptuneC1_GBzen_F_FM_pre.book Page 4 Tuesday, December 16, 2003 5:03 PM

«
...
14
15
16
17
18
...
»

Summary of Contents for Aficio 240W





























































































Reviews:

No comments