manualshive.com logo in svg

Ricoh Aficio 240W, Operating Instructions Manual, Page: 62 / 92

Share
Download
Ricoh Aficio 240W Operating Instructions Manual Download Page 62

Troubleshooting

50

4

D

D

D

D

Adding Toner

R

 

WARNING:

R

 

CAUTION:

Important

❒

Faults may occur if you use non-recommended toner.

❒

Replace toner while the machine is turned on. If you turn the machine off,
your settings will be lost and you will not be able to resume copying.

❒

Always replace toner when the message appears.

Note

❒

When the indicators blink, replace the toner as soon as possible.

❒

If toner runs out, the message “

D

Add toner

” appears and you cannot make

copies.

Reference

For details about toner storage, see p.60 “Toner”.

•

Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose of used toner containers 
in accordance with local regulations.

•

Keep toner (used or unused) and toner containers out of reach of children.

1. Lift both main unit opening levers, and then 
open the main unit upward.

2. Open the main unit front cover.

3. Hold the toner cartridge at the edge of the 
right side, and then roll it in the direction of 
the arrow.

NeptuneC1zenGB_Chapter-4  Page 50  Thursday, January 15, 2004  4:32 PM

Summary of Contents for Aficio 240W





























































































Reviews:

No comments