48
Chapter 5 1 Guaranteed Periodical Maintenance Cycle 2 Cleaning and Oiling
1. Bearing section:
2. Gear section:
1 Guaranteed Periodical Maintenance Cycle
2 Cleaning and Oiling
(2) Oiling
●The service person will visit the user periodically after delivery. The maintenance operation
described in the periodical maintenance list is performed and instructs how to follow the operation.
When the service person is called by telephone, the following maintenance must be performed
after clearing the trouble.
1. Cleaning the glass of jump base
2. Cleaning the scanner cover
3. Cleaning the document glass
4. Cleaning the ADF feed rollers and ejection rollers
Clean with a brush or dry cloth.
Clean the mirror and reflection plate in the scanner section with a blower brush.
If there is foreign matters on the glass, it will cause black lines. Clean the glass
with a blower brush or dry cloth.
(1) Cleaning
1. Paper shreds:
2. Glass:
Glass
Dry Cloth
Oil the edge surface and bearing sections with oiler, rotating the lever and
roller.
Grease the gear section after removing paper shreds on the bottom of gear.
● How to clean the glass:
1. Remove the jump plate and take
out the glass.
2. Hold the edge of the glass and
clean both sides of the glass with
dry cloth.
Summary of Contents for ADF DF7010
