GTR211 Installation Manual:
Rev 1
8
Motor Installation:
Before you start
• The GTR211 Sliding Gate Motor is suitable for powering the opening and closing motion of gates up to
1500kg in weight, up to a length of 12m.
•
Gate motion is achieved by the rotating cog of the gate motor driving the gear rack fitted to the moving
gate (GTR092, sold separately).
• The gate motor requires you to press the remote control once to open, and once again to close. This is
a safety feature to ensure safe operation.
•
The gate motor itself must be fitted within private property, never externally to a property’s boundary.
Power Supply: The GTR211 requires 1 x 10Amp AC240V 50Hz power supply (RCD Protected Weatherproof
PowerPoint). The GTR211 comes complete with a power lead and plug that is 1m long. If you do not have
a suitable RCD protected weatherproof power point within 1m of the gate motor you will need to consult a
licenced electrician.
Any works done to the motor must be completed whilst the power is off and the
motor is unplugged.
Any modifications/alterations/works to the 240V AC power components must only be
completed by a licensed electrician for your state/country.
Please Note:
Your weatherproof power outlet should be no more than 1m from the
electric gate motor.
If your weatherproof power outlet is more than 1m from the gate motor,
you will require a licensed electrician to fit a new power cable.
Any excess cable length should be cable tied and secured out of the
way of moving objects.
