GTR211 Installation Manual:
Rev 1
28
Clearing Remote Controls:
• To delete all paired remote controls, press and hold the button ‘S1’ for approx. 8 seconds. When the
‘LEARN’LED turns off, all previously paired remote controls will be deleted.
Clearing Remote Controls:
• Remove motor outer cover and continue to remove the clear PCB cover
• Press the button ‘S1’ on the control board, until the ‘LEARN’LED turns on, then release the button.
•
While the light is on, press the first button on the remote control twice, the ‘LEARN’ LED will flash
repeatedly and then turn off when remote control is paired.
Press and hold the learn button (S1) until
the Learn LED flashes ON.
While the light is on, press the first
button on the remote control twice.
The Learn LED will flash repeatedly and then
turn OFF. when the remote is paired.
Technical Support:
For support or assistance with installing your gate motor, visit
gatesupport.richmondau.com
Or ring your local Richmond Wheel & Castor Branch
AU:
1300 474 246
NZ:
0800 61 71 81
International:
+613 9551 2233
Richmond Wheel & Castor Co declines all responsibility for any consequences resulting from improper use
of the product, or use which is different from that expected and specified in the present documentation.
Richmond Wheel & Castor Co declines all responsibility for any consequences resulting from failure to
observe Good Technical Practice when constructing closing structures (door, gates etc.), as well as from
any deformation which might occur during use.
