GTR211 Installation Manual:
Rev 1
10
Step 1 - Gate Preparation Before Adding
Your Sliding Gate Motor:
• Ensure that the sliding gate is correctly installed.
• The gate is horizontal and level and the gate can glide back and forth smoothly when moved
by hand before installing the Automatic Gate Opener.
• Wheels and guide rollers should rotate easily and be free from dirt/grime.
•
Track should be flat, level and firmly affixed.
•
Any misalignment in the gate will affect performance of the automatic gate opener.
The gate should slide smoothly by hand before attempting to install the gate opener.
Please ensure that the motor power cable is not plugged in at any stage before Step 9
Step 2 - Motor Pad Footing (Minimum Requirement):
• The motor pad concrete footing requires an area of no less than 450mm long x 300mm wide
and a minimum depth of 200mm (Standard requirement).
• Ensure surface is level and parallel to the driveway
Mounting Plate Dimensions:
