GTR061 Installation Manual:
Rev 3
8
Motor Installation:
Before you start
• The GTR061 Sliding Gate Motor is suitable for powering the opening and closing motion of gates up to
800kg in weight, and up to a length of 8m on level, flat ground.
•
Gate motion is achieved by the rotating cog of the gate motor driving the gear rack fitted to the moving
gate (sold separately).
• The gate motor requires you to press the remote control once to open, and once again to close. This is
a safety feature to ensure safe operation.
•
The gate motor itself must be fitted within private property, never externally to a property’s boundary.
• This premium motor has a range of optional accessories which can be added, such as solar power,
battery backup, infrared photocells, keypads, push buttons, and warning light.
Power Supply: The GTR061 requires 1 x 10Amp AC240V 50Hz power supply (RCD Protected
Weatherproof PowerPoint). The GTR061 comes complete with a power lead and plug that is 1m long. If
you do not have a suitable RCD protected weatherproof power point within 1m of the gate motor you will
need to consult a licenced electrician.
Any works done to the motor must be completed whilst the power is off and the motor is unplugged.
The gate motor will open the gate to the right-hand side as its default setting (refer to fig 1).
Any modifications/alterations/works to the 240V AC power components must only be completed by
a licensed electrician for your state/country.
Please Note:
• Your weatherproof power outlet should be no more than 1m from the electric gate motor.
• If your weatherproof power outlet is more than 1m from the gate motor, you will require a
•
licensed electrician to fit a new power cable.
• Any excess cable length should be cable tied and secured out of the way of moving objects.
