RichAuto A1X Manual Download Page 6

Page: 6 / 86

Beijing RichAuto S&T Co., Ltd.

Forging ahead and determined to win 1



Foreword

System Introduction

RichAuto

A1X

motion control system independently developed by Beijing RichAuto S&T

Co., Ltd and it can be widely applied to machinery, advertisement, woodworking, mold

engraving machines, laser, flame, plasma cutting machines, and others in the machine control

field.

RichAuto

A1X

make

DSP as the core of the system,High-speed processing;Use embedded

structure, high degree of integration and strong stability make installation and operation easy;

Support U disk, removable storage card reader; High speed transfer, no longer dependent on

the computer to realize off-line operation

Characteristics

Adopting position control mode,support 3-axis and 4-axis linkage motion control,double Y

drive.

Standard with 8 Input/Output interface board.

Support various processing format, such as G code, PLT, bitmap and DXF etc.

Intelligent memory function,support power failure protection and breakpoint processing

function.

Support portable storage mode function.

Multi-coordinate memory function. Provide 9 work coordinates system, the user can switch

among the 9 coordinates, each coordinate system can save a process origin information.

Support adjusting spindle frequency during processing. The spindle frequency from 0 to

maximum frequency is divided into 8 gears, 1 - 8 gear can be processed directly adjust up

and down without suspend processing.

Support adjusting speed ratio during processing. Users can adjust the speed ratio from 0.1-1,

ascending or descending per 0.1 numerical.

Simple manual operation mode.Including ―Continue,Step,Dist‖, manual operation becomes

more simple and convenient.

Summary of Contents for A1X























































































Search results

Summary of Contents for A1X

Reviews:

Related manuals for A1X

Brands by name

Popular brands

RichAuto A1X, Manual

Search results

Summary of Contents for A1X

Reviews:

Related manuals for A1X

Brands by name

Popular brands