Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 32
switch signal.
Manual trigger the corresponding signal switch,if the corresponding arrow flip so,the signal
is normal.If not,please check corresponding switches or 50-pin cable and interface board.
NOTE
:Different from Voltage Setup.
Bottom arrrows
represent output signal: the former 4 number 0,1,2,3 corresponding to
spindle on/off
、
spindle speed 1-3.4,5 corresponding to alarm indicator, running indicator.
Press ―
‖ button can change the arrow direction, so it can control the output of
corresponding interface. For example, press ―
‖to flip the arrow upwards under 0, it is
equivalent to start the spindle. Press―
‖ again, the arrow flip downwards that is equivalent
to stop the spindle.
5.3.4
Manual switching coordinate system
Including
machine coordinate system
and
work coordinate system
.
Machine coordinate system is fixed, the origin of coordinates is always a fixed position
relative to the machine; Its coordinates is called mechanical values, the origin of coordinates is the
origin of the machine or reference point. so that at any time, one point of space can be confirmed
by machine coordinate system. Because of reference point is the calculation basis of machine
coordinates movement
，
powered on or remove all abnormal states
，
you need back to zero.
Work coordinate system used more greatly than other coordinates system in
processing.Usually in processing, we describe a processing position is always relative to a certain
point on the workpiece, whereas the workpiece on the machine tool's position relative to the
mechanical origin is often change, so it is necessary to introduce a set of more convenient
coordinate system during processing, this is work coordinate system.The origin of work
