36
7.0 SP2200 Specifi cations
7.1
Electrical Specifi cations
Voltage:
115 or 230 VAC (–10% / +15%)
Frequency:
50 or 60 Hz
Fusing:
Two 1.25A Slo-Blo (UL/CSA) 3AG @ 115 VAC operation, or
Two 0.75A Slo-Blo (UL/CSA) 3AG @ 230 VAC operation (line fi lter)
One 125V/5.0A fast-acting, socketed (UL/CSA) microfuse (power supply)
One 2.0A fast-acting, socketed (UL/CSA) microfuse (CPU board)
7.2
Printing Specifi cations
Printer type:
Bidirectional dot matrix
Print speed:
180 characters per second (cps), single strike, 50% duty cycle
3.5 lines per second (lps)
Line feed rate:
34 lines per second (lps)
Characters per line:
40 characters @ 12 characters per inch (cpi)
Print width:
3.33 inches
Standard matrix:
5x9 (0.012 inch diameter dots on 0.0139 inch centers)
Character height:
0.124 inches
Character set:
Upper and lower case ASCII
Line spacing:
6 lines per inch
Paper feed motor rate:
73.34 steps per inch
Printhead motor feed rate:
73.34 steps per inch
Form thickness:
Adjustable from 0.004 to 0.024 inches in increments of 0.004 inches
7.3
Communications Specifi cations
Serial communications
Interfaces:
25-pin serial port supports RS-232C (standard), RS-422A, 20mA current loop
Data rates:
300, 600, 1200, 2400, 4800, 9600, 19.2 Kbps
ASCII encoding:
1 start bit, 7 data bits (parity bit ignored), 2 stop bits
Parallel communications
Interface:
36-pin parallel port
Data rate:
Set by sending device
7.4
Environmental Specifi cations
Temperature:
–10° to +40° C (14° to 104° F)
