Rice Lake iQube 920i, Installation Manual

Page: 47 / 54

44
iQUBE
Installation Manual
Command Description
DON. b # s
Set digital output on (active) at bit b (9–24) , for
iQUBE
connected to slot s. NOTE: Odd numbered ports
use bits 9–16; even numbered ports use bits 17–24.
Example: To turn on digital output bit 1 for an
iQUBE
attached to port 3 (slot 0), use DON.9#0.
DOFF. b # s
Set digital output off (inactive) at bit b (9–24) , for
iQUBE
connected to slot s. NOTE: Odd numbered ports
use bits 9–16; even numbered ports use bits 17–24.
Example: To turn off digital output bit 6 for an
iQUBE
attached to port 8 (slot2), use DOFF.22#2.
SJ.DIO.ALIAS. b # n Digital I/O alias
SJ.DIO .b # n
Digital input function. See the
920i
I nstallation Manual , PN 67887, for more information
For SJ.DIO commands, digital inputs are specified by bit number ( b , 1–8) and the number of the
920i
serial port to which the
iQUBE
is attached ( n) .
Table 8-6. DIG I/O Serial Commands
Command Description Values
SJ.ALG.SOURCE# n Analog output source OFF, system_name
SJ.ALG.FULLSC# n Analog output full scale 0.000001–9999999.0
For commands ending with “# n ”, n is the number of the
920i
serial port to which the
iQUBE
is attached
Table 8-7. ALGOUT Serial Commands (Valid Only If Analog Output Option Is Installed)
Command Description Values
CONTACT.COMPANY Contact company name company_name (up to 30 characters)
CONTACT.ADDR1
CONTACT.ADDR2
CONTACT.ADDR3 Contact company address company_address (up to 30 characters for each line)
CONTACT.NAME1
CONTACT.NAME2
CONTACT.NAME3 Contact names contact_names (up to 20 characters each)
CONTACT.PHONE1
CONTACT.PHONE2
CONTACT.PHONE3 Contact phone numbers contact_phone_numbers (up to 20 characters each)
CONTACT.EMAIL Contact e-mail address contact_e-mail_address (up to 30 characters)
See Section 7.0 on page 38 for information about e-mail
notification of
iQUBE
alert messages.
CONTACT.NEXTCAL Next calibration date calibration_date
Table 8-8. Contact Serial Commands
Command Description Values
ALERT.FMT Alert format See Section 7.2 on page 39 for information about specifying
the alert format.
ALERT.SERV Alert SMTP server address 0.0.0.0, S MTP_server_IP_address
ALERT.PRN Alert printer port PORT n
Table 8-9. Alert Serial Commands