24
iQUBE
Installation Manual
SOURCE
OFF
system_name
Analog output source. If analog output DAC is installed, assign system name.
FULLSC
300000.0
value (weight)
Analog output full scale range. Specifies the weight value at the full scale analog output
(30 mV or 20 mA).
BIT 1 – BIT 8
—
Specifies the function of the digital I/O bit. See the
920i
Installation Manua
l, PN 67887,
for more information.
ZEROREF
ENABLE
THRH
%THRH
DELAY
Zero reference diagnostic subparameters. See Table 3-2 on page 26. The zero reference
test compares the millivolt output of section pairs when half of the load cell outputs are
below the specified threshold value.
CELLBAL
ENABLE
THRH
%TOLR
LOAD
Cell balance tolerance diagnostic subparameters. See Table 3-2 on page 26. The cell
balance test checks the outputs of section pairs for equal load distribution.
LDRIFT
ENABLE
LIMIT
%LIMIT
TIME
LOAD
Load cell drift diagnostic subparameters. See Table 3-2 on page 26.
PKtoPK
ENABLE
LIMIT
Peak-to-peak diagnostic subparameters. See Table 3-2 on page 26.
CELLEMU
ENABLE
TYPE
Cell emulation. See Table 3-2 on page 26 for more information.
MOTBAND
10.00000
value (weight)
Motion band. See Table 3-2 on page 26 for more information.
S
ERIAL Menu (
iQUBE
S
ubmenu)
Parameter
Choices
Description
Table 3-1. Serial Menu Parameters,
iQUBE
Submenu (Continued)
