RHINO SE8A, Operator'S Manual, Page: 101 / 194

ASSEMBLY
SE8A 01/11 Assembly Section 3-3
© 2011 Alamo Group Inc.
ASSEMBL
Y
A-FRAME ASSEMBLY - LIFT TYPE
1. Align each A-Frame Short Bar (5) with small hole in lug on Main Frame. Install 3/4" x 2" bolt (2) through
Main Frame Lug and A-Frame Short Bar. Secure with locknut (14).
2. Install bushing (8) through large holes in Top Link Bar (7). Align bushing in Top Link Bar between both A-
Frame Short Bars (5) and both Front Strap Bars (9). Secure with 3/4" x 6" bolt (11) and locknut (14).
3. Align bushing (4) between small holes in Top Link Bar (7). Install pin (3) through Top Link Bar, and fasten
with clip pin (6).
4. Attach Rear Support Bars (13) between Front Strap Bars (9), in inside hole, with 3/4" x 2-1/2" bolt (12) and
locknut (14). Install bushing (10) between outside holes of Front Strap Bars (9), and fasten with 3/4" x 2-1/
2" bolt (12) and locknut (14).
5. Attach Rear Support Bars (13) to the rear lugs on the Main Frame with 3/4" x 2" bolts (2) and locknuts (14).
ITEM QTY DESCRIPTION
1. 2 Hitch Pin
2. 8 Bolt
3. 1 Top Link Pin
4. 1 Top Link Bushing
5. 2 A-Frame Bushing
6. 1 Clip Pin
7. 1 Top Link Bar
8. 1 A-Frame Bushing
9. 2 Front Strap Bar
10. 1 A-Frame Bushing
11. 1 Bolt
12. 2 Bolt
13. 2 Rear Support Bar
14. 7 Locknut