RHINO RC 115, Operator'S Manual

Page: 54 / 128

OPERATION
RC115/118/120/125 02/12 Operation Section 4-6
© 2012 Alamo Group Inc.
OPERA
T
ION
3.3 Tractor Horsepower
The horsepower required to operate the shredder depends on many factors including the vegetation to be cut,
terrain condition, operator experience, and condition of the shredder and tractor. For most shredding
conditions, the RC115/118/120/125 all require a tractor with at least 100-140 HP
(see Tractor Requirements
and Capabilities for specifications). Operating the shredder with a tractor that does not have adequate
power may damage the tractor engine.
3.4 3-Point Hitch
Lift Type RC Flails should be coupled with a quick hitch only. Direct coupling to tractor 3 point will result in
driveline failure. Sufficient weights should be added to front of tractor to maintain steerage weight on front tires
when flail is raised (20% of tractor weight should be on front tires). Never stand between flail and tractor when
coupling with quick hitch. Remove or adjust drawbar to provide clearance for driveline on lift type units. Adjust
top link so machine does not tilt back when raised, increasing angles of u-joints which may cause premature
failure.
3.2 Tractor Safety Devices
If transporting or operating the tractor and implement near a public roadway, the tractor must be equipped with
proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear of
the unit. Lights and a SMV emblem must be equipped directly on implements if the visibility of the tractor
warning signals are obscured.
Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were
removed for access to connect, service, or repair the tractor or implement. Never operate the tractor PTO
with the PTO master shield missing or in the raised position.
OPS-U- 0004