S
A
FE
T
Y P
R
E
C
A
U
T
IO
N
S
Safety Precautions
It is recommended that you do NOT grind two consecutive times without a 30 second rest, or
you run the risk of overheating the RHINO
®
GRIND.
Technicians
CAUTION - Only trained and certified electrical personnel should service this
equipment. ALL WIRING MUST CONFORM TO NATIONAL AND LOCAL
CODES.
Shipping and Storage
CAUTION
- RHINO™ GRIND nut butter grinder must remain upright to avoid
damage, or injury. Always ship, carry, store, and handle the RHINO™ GRIND nut
butter grinder in an upright position to prevent improper installation and/or tip over.
Proper Lifting Procedures
When placing the RHINO™ GRIND for the first time, you will be required to lift and
set approximately 70+ lbs at the location of your choosing. The initial fill, and subsequent
refills of the nut hopper will weigh 20lbs. Where possible, we recommend using a team
approach (2x).
Always use good posture (keeping your back straight and bending your knees, not your
back) to lift. NEVER stand on a step stool, or ladder and reach beyond your arms length
to place the refilled hopper back onto the RHINO™ GRIND nut butter grinder body.
NEVER let the hopper drop into place. It must be set gently to avoid damage to the
RHINO™ GRIND nut butter grinder body.
STOPPING THE RHINO
®
GRIND
INTERRUPTING/SHUTTING OFF POWER
In the event of motor malfunction, electrical outage, surge, or
any other unusual situation where you want to immediately
shut off power to the RHINO™ GRIND:
1) Locate Main On/Off power switch and move to the OFF position.
2) Remove the power cord from the main socket at the wall.
RESUMING NORMAL OPERATION
Once the issue has been removed and corrected, the power is ready to be restored:
1) Plug power cord into the main socket.
2) Switch the Main On/Off power switch to the ON position.
3) Press the activation (start/stop) button on green illumination till the grinder
start dispensing the butter.
CAUTION
CAUTION
8
SHOCK
NOTE:The RHINO
®
GRIND is not designed for a wash-down environment
and MUST NOT be placed in an area where a water jet could be used.
