Remove hopper
from equipment
Pull to remove
front merchandiser
Unscrew the locking
captive screw on top
Rotate Cover clockwise to unlock
Pull out once aligned with slots.
Disassembly / Reassembly
SAFETY PRECAUTION FOR UNIT CLEANING
1. Switch off the RHINO™ GRIND at Main On/Off power switch.
2. Disconnect the power cord from the power source.
3. Remove, or dispose of the nut hopper contents depending on their age.
4. Disassemble as per instructions given below.
For any issues you may encounter with the RHINO™ GRIND nut butter grinder,
we recommend you take the following course of action:
-
Review this instruction manual
-
Check the Electronic Stop / Power Supply
-
Call us at 1-800-872-3490, or email [email protected]
The use of this supplied wrench may be required to break
loose the grinding wheel in the next step. Press and hold augur lock
pin and turn the wrench counter clockwise.
PLEASE NOTE:
Do
not use this tool to tighten the grinding wheel during reassembly.
WE RECOMMEND YOU HAND WASH ALL
COMPONENTS AND AVOID USING DISHWASHERS OR
DETERGENTS WHICH MAY DEGRADE THE PARTS.
CAUTION
SHOCK
1.
Push pin
upward
2. Turn wrench
counterclockwise
17
C
LE
AN
IN
G
/
S
AN
IT
IZ
IN
G
