Troubleshooting Tips
WARNING
3. Use the cut Duckbill Valve (short) supplied along with the unit.
•
Special Duckbill valve (see photo below)
4. If the siphoning still exists, order the special
grinding plate from Trade Fixtures.
(Part
#NG2521)
PRODUCT BRIDGING, OR NOT ENTERING THE GRINDER
Certain products have size and exterior surface features that allow the product to
“bridge” across the opening of the plastic hopper. When this happens, the grinder
mechanism runs dry and no product is dispensed from the machine.
Potential solutions:
1. Smaller product size typically flows better in the system.
2. Removal of the stainless steel shutter will promote improved product flow. This can
be performed by removing the cotter ring and pin allowing the removal of the shutter.
(see illustration below).
PLEASE NOTE:
Once you have removed this shutter, the
product will free flow once you pick up the hopper from the body of the grinder
spilling your nut meat all over the floor or countertop.
3. Contact Trade Fixtures for a special hopper insert which helps improve flow rate.
DUCKBILL VALVE
24
