Rheavendors Group Horeca Large 380, Installation And Maintenance Manual

Page: 21 / 33

Setting of a selection
To associate a selection to the button, which is going to be programmed, confirm FUNCTIONING .
Press button 2 . The display shows one of the following options:
PROGRAMMING:
TOTAL
PROGRAMMING:
PARTIAL
Use buttons 4 and 5 to visualise the options. Choose PROGRAMMING TOTAL if you want the
possibility to programme all the parameters of each product, otherwise choose PROGRAMMING
PARTIAL. Pressing in sequence
button 2 the display shows:
PRODUCT X
0=inhib. .0
The number of the product shows the position of the canister inside of the machine starting to count from
the left the possible positions of the product motors. If the PRODUCT X is necessary for the drink that is
being set, increase or decrease until the desired value, pushing respectively buttons
4 and 5 ; otherwise
inhibit the ingredient setting its value to 0.0. Pressing again button 2 the display shows:
start delay
PRODUCT 1 .0
Pressing respectively
buttons 4 and 5 increase or decrease the ingredient’s pouring delay after the
starting of the water associated to this product. Pressing again button 2 the display shows the same
items for other products that can be set as the previous one following the recipe of the desired drink.
Pressing again
button 2 the display shows:
WATER X time
0=inhib. .0
The number X of the WATER shows the position of the mixer starting from the left. Increase or decrease
the value pressing respectively the buttons 4 and 5 ; otherwise inhibit WATER setting its value to 0.0.
Pressing again button 2 the display shows:
start delay
WATER 1 .0
Pressing buttons 4 and 5 increase or decrease respectively the water pouring delay after the beginning
of the selection. Pressing again button 2 the display shows:
flow WATER X
slow
Pressing buttons 4 and 5 it is possible to choose among the three parameters “ slow ”, “ medium ”,
“ quick ” to increase or decrease the correspondent water flow. Pressing again button 2 the display
shows:
MIXER X
0=inhib. .0
Increase or decrease the value of the time of working of the mixer pressing respectively the button 4
and 5 ; otherwise inhibit the MIXER setting its value to 0.0. Pressing again button 2 the display shows:
start delay
MIXER X 1.0
Pressing buttons 4 and 5 increase or decrease respectively the mixer start delay after the starting of the
water associated to this mixer. Pressing again button 2 the display shows:
speed MIXER X
0
MAN1260007 V.1 – 18/12/2014 21