Rheavendors Group Horeca Large 380, Installation And Maintenance Manual

Page: 16 / 33

10 Switching on and off the machine
When the semi-automatic vending machine is installed, it is possible for the user to switch on and off the
machine according to his necessity.
10.1 Starting switch
Two switches are provided in the machine, which cut the power off all electrical and electronic
components in the machine when the door is opened in order to carry out ingredient refilling and
cleaning operations.
WARNING: if required, to switch the machine off open the door of the machine or unplug it from
the electrical mains.
Some operations will require having the machine switched on and with the door open. To activate the
machine with the door open, when specified in the instructions, insert the special plastic key, hanging on
a cord near the switch and turn it clockwise by 90°. Before closing the door, extract the plastic key.
Each
operation executed with the door open and the plastic key inserted must be carried on only by
authorised qualified personal previously informed about any risk.
WARNING: the opening and switching on of the machine with the door open (unless for cleaning
operations) must be carried out only by authorised, qualified personnel.
Do not leave the machine open unguarded.
WARNING: unplug the power supply cord.
10.2 Diagnostics cycle of the switching on
At the starting the machine carries out a diagnostics cycle to check the position of the mobile
components, the correct quantity of some ingredients and the correct water mains supply pressure. At
the end of checks, the standard invitation message will appear on the display, e.g.:
rheavendors group
- - - - - - - - - - - - - - -
version 2.4
20 - 02 - 14
the date of the update of the software and the version of the master loaded into the machine (e.g.: 2.2).
At the end of all tests the display shows the message:
rheavendors
HORECA LARGE 380
place
your jug
11 Start-up operations
11.1 First installation phase
During the First installation phase water is filled inside the boiler. Then it is necessary to set the correct
boiler’s temperature.
11.1.1 Loading the boiler
Make sure that the liquid waste bucket is correctly placed. Open the tap of the water circuit. Set on
position ON the switch on the backside of the machine. Insert the plastic key into the safety switch and
turn on the machine. The machine starts to make automatically the First Installations operations. The
display shows:
water refilling
The machine starts automatically loading the boiler with water.
MAN1260007 V.1 – 18/12/2014 16