RGB Omicrom FT, Service Manual

Page: 12 / 116

OMICROM FT
SERVICE MANUAL
21 September 1998
2.5
2.2.8. Invasive Arterial Pressure (PRES) Specifications.
Board P000PLAC01 - “TENSIOMETRO 2030594 Rev. 01”
Patient Safety
: Class I, type CF, protected against defibrillator
(according IEC601).
Number of channels
: One.
Measurement range
: -15 to 250 mmHg
Bandwidth:
0 to 15 Hz
Transducer sensitivity:
5 µV / V / mmHg
Heart Rate
: Range: 20-250 pulses per minute
Resolution: 1 pulse per minute
Accuracy:
±
3%
Gain
: Accuracy:
±
1 %
Drift: 0.1 % per
°
C
Zero Adjustment Circuit
: Range:
±
100 mmHg
Accuracy:
±
1 mmHg
Drift:
±
0.1 mmHg per
°
C
Auxiliary circuits
: Calibration circuit.
Gain selection circuit.
Zero adjustment circuit.
Probe requirements
: Connection Cable with electrical shielding.
Available alarms
: Internal failure.
Cable disconnection.
Change of the scale.
2.2.10. Pulse Oximetry (SpO
2
) Specifications.
Board P000PLAC19 - “PULAIS 060498 Rev. 02”
Patient Safety
: Class I, type BF, protected against defibrillator
(according IEC601).
Saturation Measurement
: Range: 40 -100 %
Resolution: 1 %
Accuracy:
85 to 100 % -
±
1.5 %
70 to 85 % -
±
2 %
Heart Rate
: Range: 30-250 pulses per minute
Resolution: 1 pulse per minute
Accuracy:
±
3 %
Auxiliary circuits
: Calibration circuit.
Detection circuit of sensor disconnection.
Probe requirements
: BCI sensor or compatible.
Available alarms
: Internal failure.
Cable or sensor disconnection.
Sensor off patient.
Insufficient light received.
Interferences.
Weak pulsatile signal.
Patient movement.