RGB Omicrom FT, Service Manual

Page: 14 / 116

OMICROM FT
SERVICE MANUAL
21 September 1998
2.7
2.2.14. Operating Specifications.
Sweep Speed
:
The sweep speeds available are 12.5 mm/s and 25
mm/s.
Information by display
:
The display can monitor the waveforms of ECG, NIBP,
SpO
2
, invasive pressure and respiration. The display
shows the numeric value of each measured parameter.
It shows all relevant information about each monitored
sign.
Heart Rate Measurement
:
From each pulsatile signal, the system detects the
presence of a pulse and provides an acoustic and
visual indication. The source of the heart rate showed
is selected dynamically as a function of the active signs
(if it is not in an alarm situation) according to the
following priority criteria:
1) ECG
2) PRES1
3) PRES2
4) SpO
2
5) NIBP
Alarm detection system
:
For each vital sign monitored there is an independent
alarm detection system, that detects several alarm
conditions.
The presence of an alarm situation is indicated by
visual and acoustic means.
It is possible to disable the warnings for all signals at
the same time.
It is possible to disable the alarms of each parameter in
an independent way:
It is possible to select the patient alarm levels for each
parameter. These levels can be stored to be used the
next time the monitor is turned on.
The procedural alarms that can be detected have been
specified in previous sections.
Trends Storage
:
All parameters measured are stored periodically. The
time period between consecutive storage is selectable
by the user (options: 1, 2, 3, 5, 7, 10 and 15 minutes).
According to the selected time period, the storage
capacity varies between a minimum of 5 hours and a
maximum of 72 hours.