RGB Omicrom FT, Service Manual

Page: 13 / 116

OMICROM FT
SERVICE MANUAL
21 September 1998
2.6
2.2.11. Temperature (TEMP) Specifications.
Board P000PLAC04 - “CONTROTEMP 200695 Rev. 30”
Patient Safety
: Class I, type CF, protected against defibrillator
(according IEC601).
Measurement Range
: 15 to 45
°
C / 59 to 113
°
F
Resolution
: 0.1
°
C / 0.2
°
F
Accuracy
:
±
0.1
°
C (it is not included the probe tolerance).
Auxiliary circuits
: Calibration circuit.
Probe requirements
: YSI Series 400 Probes or compatibles.
2.2.12. Output Signals Specifications.
Board P000PLAC07 - “CONECTOR 130598 Rev. 03”
RS-232 output
: One channel.
DB9 Male Connector.
PC connection or External Printer connection.
Electrically isolated.
RS-485 output
: Two optional channels.
Electrically isolated.
2.2.13. Materials Specifications.
This section includes those components or parts whose specifications are
essential to guarantee the patient safety from the electrical point of view.
AC Power Cord
: Female plug CEE22l.
Male plug Schuko IEC.
It must comply VDE / IEC standards.
AC Monitor Plug
: Module Filter according to IEC601.
Two fuses incorporated.
1 pole rocker switch incorporated.
AC/DC Converter
: It must comply with IEC601 Standard.
Isolation Voltage Input/Output >4000 V~.
Universal Input Voltage 85-250 V~ / 48-64 Hz.
Output voltage 15 VDC.
Minimum Output Power 40 W.