RFoG RF-R586 Series User Manual Download Page 19

Page: 19 / 124

RF-R586 Series Industrial Grade Cellular Router

P.H.U. RFoG Tomasz Paszkowski, ul. Starogrodzka 1/2, 72-300 Gryfice, NIP:857-115-72-13, REGON 811833063, tel. 602794466

3.3.2 Operation Mode

Bridge

All Ethernet and wireless interfaces are bridged into a single bridge

interface.

Gateway

The first Ethernet port is treated as WAN port. The other Ethernet ports and the
wireless interface are bridged together and are treated as LAN ports.

AP Client

The wireless apcli interface is treated as WAN port and the wireless ap interface
and the Ethernet ports are LAN ports.

NAT

Network Address Translation

Normally and default we select “Gateway mode”, and keep all other parameters as default.

Summary of Contents for RF-R586 Series





























































































































Search results

Summary of Contents for RF-R586 Series

Reviews:

Related manuals for RF-R586 Series

Brands by name

Popular brands

RFoG RF-R586 Series, User Manual

Search results

Summary of Contents for RF-R586 Series

Reviews:

Related manuals for RF-R586 Series

Brands by name

Popular brands