RF-R586 Series Industrial Grade Cellular Router
P.H.U. RFoG Tomasz Paszkowski, ul. Starogrodzka 1/2, 72-300 Gryfice, NIP:857-115-72-13, REGON 811833063, tel. 602794466
112
Once the Static (fixed IP) is failed, RF-R586 will switch to cellular automatically as follows,
5.6 WAN RJ45 DHCP and Cellular Fail Over backup redundancy
Please connect the RJ45 WAN port and the upper Router LAN RJ45 port via RJ45 cable. The RF-R586
WAN LED should be on.
Step 1) log into the RF-R586 router web.
Step 2) Internet Settings – Route Fail Over
Active/Pasive: tick it
Back To Primary WAN When Possible: tick it (if you activate this, the router will automatically switch to
primary main line from secondary line if primary main line resume to work. If you don’t activate this, the
router will keep working in secondary line if primary line fails.)
Router Priority: You can select main line and secondary line for Cellular and WAN RJ45
“STATIC/DHCP/PPPoE”
For example, here we set Cellular as secondary line, and WAN RJ45 DHCP as main line. Then choose
as the picture above.
Check Count: fill in the number you want to check the line available detection.
Checking Method: fill in a public IP address that can be ping through.
With the above configuration, the router will try to ping IP 74. 125.71.138 and if cannot be through for 3
Summary of Contents for RF-R586 Series
Page 1: ...RF R586 Series Industrial Grade Cellular Router User Manual ...
Page 124: ......
