RFoG RF-R586 Series User Manual Download Page 111

Page: 111 / 124

RF-R586 Series Industrial Grade Cellular Router

P.H.U. RFoG Tomasz Paszkowski, ul. Starogrodzka 1/2, 72-300 Gryfice, NIP:857-115-72-13, REGON 811833063, tel. 602794466

111

IP Address: fill in the assigned fixed LAN IP address from the upper router for RF-R586. Here our upper

router can assign a fixed LAN IP 192.168.1.128 for RF-R586.

Subnet Mask: the upper router’s subnet mask.

Default Gateway: fill in the default gateway. Here the default gateway is 192.168.1.1 of upper router.

Primary DNS Server: fill in a right DNS server

Secondary DNS Server: fill in a right DNS server.

Notes: Do not forget to click “Apply” button.

Step 5) The RF-R586 router will automatically reboot and try to connect the STATIC WAN RJ45 as main

line. If main line failed, it will switch to Cell as secondary line. And if STATIC WAN RJ45 resume to work,

it will switch from Cell line to STATIC WAN RJ45 line.

The following page indicated the Static fixed IP is working.

Summary of Contents for RF-R586 Series





























































































































Search results

Summary of Contents for RF-R586 Series

Reviews:

Related manuals for RF-R586 Series

Brands by name

Popular brands

RFoG RF-R586 Series, User Manual

Search results

Summary of Contents for RF-R586 Series

Reviews:

Related manuals for RF-R586 Series

Brands by name

Popular brands