RFoG RF-R586 Series User Manual Download Page 123

Page: 123 / 124

RF-R586 Series Industrial Grade Cellular Router

P.H.U. RFoG Tomasz Paszkowski, ul. Starogrodzka 1/2, 72-300 Gryfice, NIP:857-115-72-13, REGON 811833063, tel. 602794466

123

Chapter 6

6 OBTAINING DOCUMENTS

You can visit our website:

http://www.rfog.pl/

Or contact with RFoG headquarter Sales listed at the end of documentation to get the latest

documents.

All information contained in this document is subject to change without notice. The products

described in this document are NOT intended for use in implantation or other life support

applications where malfunction may result in injury or death to persons.

The information contained in this document does not affect or change RFoG’s product

specifications or warranties. Nothing in this document shall operate as an express or implied

license or indemnity under the intellectual property rights of RFoG or third parties. All information

contained in this document was obtained in specific environments, and is presented as an

illustration. The results obtained in other operating environment may vary.

THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In

no event will RFoG be liable for damages arising directly from any use of the information contained

in this document.

Contact

RFoG Tomasz Paszkowski,

Starogrodzka 1/2, 72-300 GRYFICE, POLAND

Website

：

http://www.rfog.pl

Summary of Contents for RF-R586 Series





























































































































Search results

Summary of Contents for RF-R586 Series

Reviews:

Related manuals for RF-R586 Series

Brands by name

Popular brands

RFoG RF-R586 Series, User Manual

Search results

Summary of Contents for RF-R586 Series

Reviews:

Related manuals for RF-R586 Series

Brands by name

Popular brands