RFNet Wireless LAN Access Point AP-I002
Click on this hyperlink, a change password page will pop up. Only after you enter the correct
username & old password, and the new password in the “new password” & “confirm new
password” fields, the change of password will take effect.
To Enable SNMP
Tick the enable check box. You can disable SNMP function by deselecting this check box.
To Set Trap Host IP
Trap host is your SNMP manager. Whenever the AP-I002 powers up or experiences some critical
conditions, it will send out traps to this IP address.
To Change System Contact, System Location, System Description
These are for you to specify your own specific information. You only need to type in the field.
Please note that the maximum of each piece of information is 100 characters.
To Change Community Read Or Read-Write String in SNMP
When SNMP manager wants to access the agent inside AP-I002, it must have the same
community string.
8. Log page (Read-Only)
There is a limited buffer inside the AP-I002. So the AP-I002 only buffers the latest 10 accesses to
it. The format is: IP address method (get or post) time.
The log on time is measured from the moment this AP-I002 powered up. For accurate log on time
and detailed information about the user, we recommend you to install the Network Management
Software
(NMS)
. The page appearing as below only serves as a simple log function. The time
format is hour : minute : second.
9. Help page (Read-Only)
User Manual
23
