RFNet Wireless LAN Access Point AP-I002
3.4 Management
3.4.1 Web Server Within Access Point
1.Access the web server
To access the web server, you must know the IP address of the AP-I002. You have several options
to get the IP address, which depends on the environment of your network.
•
If the AP-I002 works in DHCP mode, you may need to install a small software called
apsearch
, which especially useful for you to find the AP-I002. For details on using the apsearch, please
refer to “Access Point Search” on Page 23.
•
If the AP-I002 works in static mode, it means that you have already known the IP address. In
case you forget the static IP address, just follow the DHCP mode solution.
•
If you have installed the
Network Management Software
(“NMS”)
, you can get the IP
address of each AP-I002 within your network no matter which mode the AP-I002 is working in.
After getting the IP address, you are ready to access the web server through any web browser. We
recommend Internet Explorer. Just type the IP address in the IE’s address text box and press
Enter, you’ll see the AP-I002’s homepage on the screen as follows, which means that you have
already gotten the correct IP address and this AP-I002 is working well.
User Manual
15
