RFNet Wireless LAN Access Point AP-I002
Figure 2-2 AP-I002 with attached antenna
2.3.2 Removing Top Cover of AP-I002
6) Removing Screw 1 and 2 (See Figure 2-3 below);
Figure2- 3 Back Side View of AP-I002
7) Using two hands to push on the two grids (See Figure 2-4 below) on the left and right top of the
unit;
Figure 2- 4 Left Side View of AP-I002
8) Gently lift up the top cover.
2.3.3 Installing DC Power Cord and Ethernet Cable
After removing the top cover, you can install the DC power cord and Ethernet cable. Please follow
cable styling below.
External
Antenna
Grid (for push use)
Screw 2
Screw 1
Ethernet Cable
DC Power Cord
Figure 2–5 Installations of DC Power Cord and Ethernet Cable
User Manual
10