HN-1010/1510
Glossary of Terms
Refer to the following list of terms that may be unfamiliar to you. These terms are
used throughout this document.
Term
Definition
ARQ
Automatic Repeat Request. The operation in which the radio
will re-send the data until it is received correctly.
bps
Bits-per-second. A measure of information transfer rate of
digital data across a channel.
Decibel
A measure of the ratio between two signal levels. Used to
express either loss or gain.
dBi
Decibels referenced to an ideal isotropic radiator in free space.
Used to express antenna gain.
dBm
Decibels referenced to 1 milliwatt. An absolute unit used to
measure signal power. Transmitter power output or received
signal strength.
DCE
Data Communications Equipment. A device that receives data in
the form of digital signals at its input. The modem side of a
computer-to-modem connection.
DCD
Data Carrier Detect.
DTE
Data Terminal Equipment. A device that provides data in the
form of digital signals at its output. The computer side of a
computer-to-modem connection.
EIRP
Effective Isotropic Radiated Power.
ISM
Industrial, Scientific, or Medical band operating at 2.4 GHz.
Allows use of a radio without a license, but the equipment must
be immune to interference from other users in the band and
approved for use in the intended country.
Latency
The delay between when data is received on TX until it is output
on RX.
RMA
Return Material Authorization.
RTU
Remote Terminal Unit. A device used in data collection.
TDMA
Time Division Multi Access. A time slot multiplexing protocol
for multinode networking.
©
2000- 2004 Cirronet
™
Inc
3
M-2410-0010 Rev A
