HN-1010/1510
HopNet Configuration Wizard (5.0 or later)
If you haven’t already installed the Wizard program, refer to the
Getting Started
section of this manual for instructions. Open the Wizard by double-clicking on the
icon on the desktop. When the Wizard boots up, it will automatically detect the serial
port to which the HopNet radio is connected and its baud rate. This process takes a
few seconds to complete. During this process, the “Please wait” screen is displayed.
Once the radio has been found and the Baudrate determined, the “Finished” screen is
displayed. Click on the Continue button to enter the Wizard.
NOTE: The HopNet configuration Wizard is used with a variety of Cirronet radios.
Not all radios support all the functions and features of every Cirronet radio. Thus,
some selections in the Wizard will be grayed out if they are not applicable to the
radio in use.
After detecting the serial port and baud rate of the HopNet radio, the Wizard reads the
settings of the HopNet radio that is connected to the PC and will display them in the
various parameter windows. In the bottom left corner of the Wizard window, the
Base/Remote status, the serial number and the communication port are always
displayed.
NOTE: The S/N displayed in the bottom left corner is the serial number of the
radio inside the unit and is different from the serial number of the HopNet unit.
Both the HopNet unit serial number and the radio serial number are on the radio
unit of the HopNet product. The Wizard will also prompt to save the configuration
settings to a file.
©
2000- 2004 Cirronet
™
Inc
18
M-2410-0010 Rev A
