RFL Network Management Software
RFL 9508D UCC
RFL Electronics Inc.
Section 4.
4.1.1
RFL NETWORK MANAGEMENT
SOFTWARE
4.1
GENERAL INFORMATION
The RFL 9508D NMS is a software program which uses the Microsoft Windows operating system. It
enables the user to perform several different tasks related to the RFL 9508D when in a network
configuration. A brief description of these tasks is listed below. A more detailed description of how
these tasks can be implemented is discussed later in this section.
1.
Enables the user to communicate with all 9508D terminals located in a network.
2.
Enables the user to access information regarding the configuration of any node in the
network.
5.
Enables the user to customize the software for specific requirements.
6.
Enables the user to change card parameters in real time.
7.
Enables the user to perform network troubleshooting and maintenance.
8.
Enables the user to set up RFL 9508D RF parameters.
SYSTEM REQUIREMENTS
In order to use the Network Management Software (NMS) your PC must meet the following minimum
requirements:
1.
The PC must be IBM compatible with a hard disk drive and a CD ROM drive.
2.
The PC must use an Intel Pentium microprocessor or higher.
3.
The PC must have a minimum of 8MB of RAM (16MB of RAM preferred).
4.
The PC must have Windows 2000, NT, or XP.
5.
The hard disk must have at least 40 megabytes of free disk space for the Network
Management Software (NMS)
September 7, 2012
4-1
(973) 334-3100
