RFL VF-5XP
RFL Electronics Inc.
July 10, 2007
22
(973) 334-3100
VF-5XP Configuration Settings:
1. In/Out of Service
The VF-5XP can be set to be In Service, or Out Of Service.
For the VF-5XP module to be in service, select ON (Service ON).
For the VF-5XP module to be out of service, select OFF (Service OFF).
2. Time Slot
The Time Slot can be set from 1-24 for T1 systems and from 1-31 for E1 systems. Click on the desired
time slot in the pull down box to make the selection.
3. Chan 1 ON/OFF
Channel 1 can be set to ON or OFF.
When set to ON, Channel 1 is enabled (ON).
When set to OFF, Channel 1 is disabled (OFF).
4. Bus Direction
The Bus Direction can be set to TXA or TXB.
When set to TXA, Channel 1 transmits in the A direction and receives from the B direction.
When set to TXB, Channel 1 transmits in the B direction and receives from the A direction.
In a typical RFL9508 system, this is set to TXA.
5. Tx1 Level Adjust Sign
The Tx1 Level can be set from –23dBm to +10dBm in 0.5dBm steps. First select the sign by clicking
on the (+ or -), then select the level as described in step 6 below
6. Tx1 Level Volume (db)
The Tx1 Level can be set from –23dBm to +10dBm in 0.5dBm steps. Select the level by clicking on
the level you want, in the pull down box
7. Rx1 Level Adjust Sign
The Rx1 Level can be set from –31.5dBm to +10dBm in 0.5dBm steps. First select the sign by
clicking on the (+ or -), then select the level as described in step 8 below
8. Rx1 Level Volume (db)
The Rx1 Level can be set from –31.5dBm to +10dBm in 0.5dBm steps. Select the level by clicking on
the level you want, in the pull down box
9. Chan 1 Signaling
When set to enabled, Chan 1 Signaling is active (in use).
When set to disabled, Chan 1 Signaling is inactive (not in use).
10. Chan 1 Busy/Not Busy
The Chan 1 Busy/Not Busy parameter allows the user to activate or deactivate the Busy function by
selecting Busy, or Not Busy.
11. Chan 1 1kHz Test Tone
The Chan 1 1kHz Test Tone can be turned On by selecting Enable, or turned Off by selecting Disable.
