6 |
P a g e
R F M O G U L 3 6 0 4 V i a T e r r a S t S a l t L a k e C i t y , U T 8 4 1 1 5
R e v 5 / 2 0
S a l e s : 8 0 1 - 8 9 5 - 3 3 9 2 s a l e s @ r f m o g u l . c o m
INSTALLATION
It is not necessary to raise the Dish Arms when securing the Dish Mount to the Vehicle or
Trailer. The Mounting Plate comes with pre-drilled holes and slots for convenience. It is OK to
drill other holes in the mounting plate for installation.
The Dish Mount includes a Feed Stow Plate that can be placed in an ideal position to allow for
the Feed Assembly to touch and slide on the roof surface. This can be secured after the stow is
tested and the Feed slides completely on the plate.
The Mounting Plate is designed so the Connector Box can be placed on either side to simplify
wiring.
When installed on a vehicle the
dish will have a rotational radius of
about 52” for the RFM1200 and
46” for the RFM960 from the
center of the Mount Base when the
system is searching for a Satellite
that has an elevation of about 10
degrees of the horizon.
In extreme northern or southern
parts of the world the clearance
required may be even less.
The Mounting Pan is 48” x 23” (7.7
Sq. Ft Area).
