7 |
P a g e
R F M O G U L 3 6 0 4 V i a T e r r a S t S a l t L a k e C i t y , U T 8 4 1 1 5
R e v 5 / 2 0
S a l e s : 8 0 1 - 8 9 5 - 3 3 9 2 s a l e s @ r f m o g u l . c o m
Use a Lap Sealant (Dicor 501LSG or Equiv) to help secure the Mounting Pan to the Roof.
Using a Lap Sealant (Dicor 501LSG or Equiv.) will add additional bonding to the vehicle surface.
Running a bead of this sealant lengthwise along the bottom edges of the mounting plate and 2
beads through the center lengths of the plate is recommended when possible. Remember once
this sealant has cured removal of this plate will be difficult.
Check with the vehicle Manufacture to determine recommended type of hardware to use for
securing the Dish Mount/Dish Pan to the Vehicle. Use a minimum of 6 screws on both sides of
the mounting plate in the slotted holes. Use at least four screws on both sides of the Dish
Mount AZ/EL Base. Use sealant where required (in drill/screw holes) to prevent water leaks
through the roof.
The Feed Stow Plate is used only as a protector to the roof surface. It can be secured with 4
short self-tapping screws and waterproof sealant (Dicor or similar) to prevent leaking. If putting
any sealant under the Stow Plate use it sparingly in case adjustment is necessary.
