17 |
P a g e
R F M O G U L 3 6 0 4 V i a T e r r a S t S a l t L a k e C i t y , U T 8 4 1 1 5
R e v 5 / 2 0
S a l e s : 8 0 1 - 8 9 5 - 3 3 9 2 s a l e s @ r f m o g u l . c o m
For typical setup, you might modify IP Address and the Default Gateway and Subnet Mask.
If you have several RF Mogul Systems, you can name each system by changing the Device
Name. The Device Name will be viewable in the Top Frame of every HTML Page under the
Satellite Antenna Controller. (see above)
If additional security is required the IT Administrator can lock this system down with Network
Name, Username and Administrator Password. Before exiting this page if a username and
password have been added you should document these changes for future requirements.
After all changes are completed re-verify the modifications and then select the APPLY located in
the top right of this page. The system should return to the Main Status Page after updating.
Move the mouse to highlight
Configuration
then select
RF Settings
.
The RF Settings page, above, must be configured correctly for the Antenna to find Satellites.
Check the LNB specifications on the LNB Label attached to the Feed Assembly of the Antenna.
You should find LNB Voltage, LO Frequency, and RF Bandwidth.
