REYNAERS 062.8620, Installer Manual

Page: 10 / 86

10
Ref. Element Function
L LED
connector • Connection for LED
• The LED can also be built into the operating button.
M Operating
button
connector Connection for the operating button or cable to
a normally open relay contact of the building
management system.
3. INSTALLATION AND SET-UP
3.1. SET-UP
The installation procedure consists of:
Â
physical installation; and
Â
set-up
There are two options as regards set-up:
Type of set-up Method Application
Manual set-up Only with the DIP switches,
feedback from the LEDs Suitable for basic
functions
Via PC or tablet The PC or tablet is connected to
the EC via a cable or Wi-Fi.
Additional functions
possible
3.1.1. PHYSICAL INSTALLATION
Place of installation
• The EC is a complex electronic component
that must be handled with the necessary care.
• Install the EC in a dry environment in a
splashproof switch box IP53 or more, with DIN
rail and at least 9 free U-modules.
• Make the EC inaccessible to unauthorised
persons.
• Use the cables provided. Do not shorten or
extend the cables yourself.