REYNAERS 062.8620, Installer Manual

Page: 16 / 86

16
Â
Step 5: Follow the instructions on the screens.
Â
Step 6: In due course press the SERVICE button again to switch the EC
back to normal operation mode.
3.2. SOFTWARE UPDATE
• Remove the power cable from connector B (see 2.3.1. on p.5).
• Insert the USB stick with the most recent version of the software into one
of the USB ports.
• Keep the SERVICE button pressed while reconnecting the power cable.
• The upgrade will now take place automatically as follows:
Â
Step 1: The red LED 606 (LED-A on image page 6) flashes.
The EC is searching for the file on the USB stick.
Â
Step 2: LED 606 (LED-A on image page 6) flashes and LED 607 (LED-B
on image page 6) lights up solid.
The software is downloading.
Â
Step 3: LED 607 (LED-B on image page 6) flashes.
The upgrade is in progress.
Â
Step 4: Both LEDs light up briefly.
The EC is restarting.
Â
Step 5: Both LEDs are off.
Normal status.
Both LEDs should therefore never light up in
normal conditions.