REYNAERS 062.8620, Installer Manual

Page: 22 / 86

22
3.1.1. INPUT BOARD
The input provides 4 extra push buttons apart from the default button on the
element controller. The action (button mode) that should be coupled to a push
on the button can be configured either as last step of a setup procedure or on
an existing setup from the button menu.
3.1.2. OUTPUT BOARD
The output board has 2 pre-defined output relays indicating the status of the
window setup.
-
RELAY 1 indicates a closed position:
o Normal open contact (NO) will close when all vents are closed
o Normal closed contact (NC) will open when all vents are closed
- RELAY 2 indicates movement:
o Normal open contact (NO) will close
during movement
o Normal closed contact (NC) will open
during movement