Connection line
Stranded wire
mm
2
25
AWG
4
Tightening torque
Nm
2,0
2,5
HCS03.1E-W0210
Connection line
Stranded wire
mm
2
50
AWG
0
Tightening torque
Nm
8,0
9,0
HCS03.1E-W0xxx
Voltage load
V
n.s.
Short circuit protection
To be ensured by means of appropriate fusing elements in
the mains connection at X3
n.s.
Not specified
Fig.5-11:
Function, Pin Assignment
Notes on Installation
Maximum allowed line length to external braking resistor: 5 m
Twist unshielded lines.
Danger by insufficient installation!
CAUTION
Protect the lines with the appropriate fusing elements in the supply feeder.
For the connecting lines at X9, use at least the cross section of the lines for
mains connection at X3.
5.2.7
Terminal Block, 24V - 0V (24V Supply)
Function, Pin Assignment
Connection of external 24V supply:
24V supply of HMS, HMD, HCS power sections (not at HCS02)
●
For the power section of the drive controller
●
For brake control via X6
●
For the control section of the drive controller with the optional modules,
except for such optional modules (e.g. safety technology S1) which re‐
quire their own power supply
Technical Data of the Connection Point
View
Identifica‐
tion
Function
+24V
Power supply
Connection to neighboring devices with contact bars from
accessory HAS01.1
0V
Reference potential for power supply
Connection to neighboring devices with contact bars from
accessory HAS01.1
Screw connection
M6 thread at device (terminal block)
Unit
Min.
Max.
DOK-INDRV*-HCS03******-IT01-EN-P
Rexroth IndraDrive Drive Controllers Power Sections HCS03
Bosch Rexroth AG
39/67
Instructions for Use