17
EN
17
EN
The set of humidification is allowed only before running a cycle. To change the set of
humidification: press STEAM button and on the Display 1 show "hum", the Display 2 (DISP2)
show flashing the set-humidifies, with + / - button you change its value.
COOKING CYCLE
The oven is suitable for 3 different cooking phase for each cooking program (1,2,3).
COOKING CYCLE LED
The led that is on will show you in which cooking phase is operating (1,2,3) .
HEATING ELEMENTS LED
When heating elements are working the led is
on.
•
CELSIUS / FAHRENHEIT LED
The led for Celsius or Fahrenheit will be on to
indicate in which condition the oven is operating.
COOKING PROGRAMS
To program a cooking process press the button and acting on + / - you can select the program
number to set. After selected the program number confirm pressing on cooking program
button. Each program can be modified any time.
•
AUTOMATIC PREHEATING
This function is automatic for all cooking programs (manual or programmable).
This pre-heats the oven to 20% value higher than the set temperature. This function is
necessary to compensate for the loss of heat through opening the door to put food in.
When a program starts the oven first starts this preheat cycle (“PRE” on the display and the
first cooking cycle led “P” will light), it beeps at the end and only stops when the door is
opened. The previously selected program starts automatically when the door is closed.
The beeping can be stopped by pressing any button other than opening the door. During pre-
heating is not possible to use the humidity.
MANUAL COOKING
Press ON/OFF button to active the oven and after setting TEMPERATURE, TIME, STEAM
(see previous instruction) the cooking cycle begins by pressing START/STOP. The oven will
start to pre-heat and after “beep” will be ready to load the food. After introduced the food will
start the program settled. The cooking cycle may be stopped at any time by pressing
START/STOP. During the cooking process you can modify the Temperature and the Time,
only the automatic STEAM figure cannot be changed during operating, you need to stop the
oven and modify manually.
Manual STEAM can be introduced any time pressing the STEAM button.
During the cooking process the time display will show the count-down.
END flashes on the display at the end of a cooking cycle, fan, humidifying and heating stop
and it beeps for 40 seconds.
PROGRAMMED COOKING
The oven has 99 pre-programmed recipes, each one with 3 cooking phases (1,2,3,).
