background image

17

EN

Dear Customer,

Thank you for purchasing this Revolution appliance. Please read this manual carefully before connecting 
the appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular 
very carefully.

INTRODUCTION

This manual is meant to provide customers with in-
formation on the slicer and its specifi cations and the 
necessary operating and maintenance instructions 
in order to guarantee the best possible use of the 
machine and preserve its effi ciency in the long term.

This manual is to be used by qualifi ed and skilled 
people will be informed about the use of the slicer 
and its periodical maintenance.

1. INFORMATION ON THE SLICER

1.1. GENERAL PRECAUTIONS

• The slicer must be operated only by highly quali-

fi ed people who are fully aware of the safety meas-
ures described in this manual.

• In case of a personnel turn over, training is to be 

provided in advance.

• Although the slicer is equipped with safety devices 

in the dangerous points, it is recommended not to 
touch the blade and the moving components.

• Before starting cleaning and maintenance, discon-

nect the slicer plug from the supply socket.

• Assess the residual risks carefully when protec-

tion devices are removed to carry out cleaning and 
maintenance.

• Cleaning and maintenance require great concen-

tration.

• A regular control of the electric supply cords is ab-

solutely necessary; a worn-out or damaged cord 
can expose users to great electric shock hazard.

•  If the slicer shows malfunctions, it is recommended 

not to use it and to abstain from trying to repair it; 
please call the “SERVICE CENTRE”.

• 

Do not use the slicer for frozen products, meat 
and fish with bones and any products other than 
foodstuffs.

• 

Do not use the slicer without the help of the meat 
pusher, when the meat is nearly finished.

• 

Do not place yourself in a dangerous position, 
the blade may cause injuries.

The manufacturer is not liable in the following cases:

 

- if the slicer has been tampered by non-author-

ized personnel;

 

- if some parts have been substituted by non orig-

inal spare parts;

 

- if the instructions included in this manual are 

not followed accurately;

 

- if the slicer is not cleaned and oiled with the 

right products.

Summary of Contents for 210239

































Reviews: