20
Configuration D
Summary:
two Dual PowerLab channels charging separate packs, one power source,
Components:
1 Dual PowerLab 8x2
1 or 2 power source(s) (one shown)
2 standard adapters or Safe Parallel Adapters (1 adapter per pack) or MPAs
2 or more packs (Safe Parallel Adapters and MPA require same cell count for all
packs)
1 optional FUIM3 for computer support
1 optional “Y” servo cable (required for Expansion Channel operation with
computer support)
Male-male servo cable (required for Expansion Channel operation with or without
computer support)
Dual PowerLab 8x2 mode:
Expansion Channel.
Dual PowerLab 8x2 maximum charge power:
up to 1344W to each pack (8s) using
40VDC/3400W power source. Standard house circuit would likely not provide enough
power; would require 240VAC power supply for full power. Optionally, power each
channel using 40VDC/1700W power sources on 2 x 20A breakers.
Summary of Contents for Dual PowerLab 8x2
Page 17: ...17 See also Charge packs in parallel ...
Page 19: ...19 ...
