SERENA P GB-R04 del 03-07-17
00/Per Bertani/Manuali d’uso Serena/ Serena con stampante
10/99
BECOME INVALID AUTOMATICALLY.
TO COMPLY WITH THE TRACEABILITY OF THE STERILIZER ANY CHANGE OF ADDRESS OF THE SAME
MACHINE MUST BE COMMUNICATED TO THE MANUFACTURER / DEALER.
ANY CHANGES MADE ON ITS DEVICE or safety devices, WHICH MAY AFFECT THE FUNCTIONS
PROVIDED BY THE MANUFACTURER and the risks of the risk analysis, included in the “Technical
Construction File”,
WILL BE FULL RESPONSIBILITY OF THE RUN. AS CHANGE IS MEANT ALSO THE FAILURE OF THE
INSTRUCTIONS, REPRESENTATIONS AND EFFORT NONCONFORMING AND THE USE OF PARTS NOT
ORIGINAL.
Any change, even if not substantial, must be communicated by registered post and also approved by
the MANUFACTURER, THAT will approve THE CHANGES only if, such amendment, shall not constitute
implementations of risk analysis AND THE risks of the machine.
Any change made without notice to the MANUFACTURER, will constitute CANCELLATION OF the
“CE” Declaration of Conformity, making void any warranty and guarantee by the same.
The manufacturer is not responsible for:
•
The placement of a protection mechanisms against overcurrent for power conductors of the
electrical equipment, which must be placed upstream of the apparatus and duly reported.
•
the installation of a power plug to be placed between the electrical panel and the electrical
appliance in place of the existing installation.
1.7 WARRANTIES CONDITIONS
This appliance is guaranteed for one year (12 months) from the date of purchase, on the whole territory of the
European Union; the date of the delivery note / invoice will bethe authentication
The device is used for professional use.
During this period, the manufacturer will repair or replace for free those pieces that, at its own sole discretion,
were to be originally defective, with only the reimbursement of travel expenses incurred by the technicians of the
"Service Centre", at doorstep or totally free if the equipment is delivered to BARCO di Bibbiano (RE).
Defective parts replaced become the property of the manufacturer.
If the defect is not repaired, the manufacturer may avoid the termination of the contract by the customer by
offering free replacement of the property.
Are not covered by the warranty the damaged parts for transport / shock for bad or improper installation / use,
through neglect or misuse, tampering by unauthorized persons, damages weather or other natural events or other
causes not dependent on REVERBERI, supplies and / or subjected to wear / low.
Further or other claims for damages, in addition to those provided by law, are excluded.
The manufacturer will charge the cost of repair if the returned product is not covered under warranty.
Interventions for alleged defects or casual checking shall be borne by the customer.
Any repair of transport to and from the "Technical Assistance Centre" of BARCO di Bibbiano (RE) is done at the
expense and responsibility of the customer.
The technical staff, when called to repair, will be sent in time only compatible with the business needs of the
manufacturer.
Any use bans imposed by the Health Authority or by other competent bodies, do not entitle the buyer to demand
the surrender or to ask for damages.
Any difference on the exterior colour or colour effects of the various parts making up the unit are not considered
defects: the differences may be e.g. due to the manual workers.
The inability to ensure substitutability of parts that make up the set with pieces from standard / freshmen / supplies
purchased specifically different and not as a replacement is not considered a defect.
In case of repair / replacement of defective parts or replacement of the equipment during the warranty period, the